SYNOPSIS
git gc [--aggressive] [--auto] [--[no-]detach] [--quiet] [--prune=<date> | --no-prune] [--force] [--keep-largest-pack]
DESCRIPTION
Runs a number of housekeeping tasks within the current repository, such as compressing file revisions (to reduce disk space and increase performance), removing unreachable objects which may have been created from prior invocations of git add, packing refs, pruning reflog, rerere metadata or stale working trees. May also update ancillary indexes such as the commit-graph.
When common porcelain operations that create objects are run, they
will check whether the repository has grown substantially since the
last maintenance, and if so run git
gc
automatically. See gc.auto
below for how to disable this behavior.
Running git
gc
manually should only be needed when adding objects to
a repository without regularly running such porcelain commands, to do
a one-off repository optimization, or e.g. to clean up a suboptimal
mass-import. See the "PACKFILE OPTIMIZATION" section in
git-fast-import(1) for more details on the import case.
OPTIONS
- --aggressive
-
Usually git gc runs very quickly while providing good disk space utilization and performance. This option will cause git gc to more aggressively optimize the repository at the expense of taking much more time. The effects of this optimization are mostly persistent. See the "AGGRESSIVE" section below for details.
- --auto
-
With this option, git gc checks whether any housekeeping is required; if not, it exits without performing any work.
See the
gc.auto
option in the "CONFIGURATION" section below for how this heuristic works.Once housekeeping is triggered by exceeding the limits of configuration options such as
gc.auto
andgc.autoPackLimit
, all other housekeeping tasks (e.g. rerere, working trees, reflog…) will be performed as well. - --[no-]detach
-
Run in the background if the system supports it. This option overrides the
gc.autoDetach
config. - --[no-]cruft
-
When expiring unreachable objects, pack them separately into a cruft pack instead of storing them as loose objects.
--cruft
is on by default. - --max-cruft-size=<n>
-
When packing unreachable objects into a cruft pack, limit the size of new cruft packs to be at most <n> bytes. Overrides any value specified via the
gc.maxCruftSize
configuration. See the--max-cruft-size
option of git-repack(1) for more. - --prune=<date>
-
Prune loose objects older than date (default is 2 weeks ago, overridable by the config variable
gc.pruneExpire
). --prune=now prunes loose objects regardless of their age and increases the risk of corruption if another process is writing to the repository concurrently; see "NOTES" below. --prune is on by default. - --no-prune
-
Do not prune any loose objects.
- --quiet
-
Suppress all progress reports.
- --force
-
Force
git
gc
to run even if there may be anothergit
gc
instance running on this repository. - --keep-largest-pack
-
All packs except the largest non-cruft pack, any packs marked with a .
keep
file, and any cruft pack(s) are consolidated into a single pack. When this option is used,gc.bigPackThreshold
is ignored.
AGGRESSIVE
When the --aggressive
option is supplied, git-repack(1) will
be invoked with the -f
flag, which in turn will pass
--no-reuse-delta
to git-pack-objects(1). This will throw
away any existing deltas and re-compute them, at the expense of
spending much more time on the repacking.
The effects of this are mostly persistent, e.g. when packs and loose objects are coalesced into one another pack the existing deltas in that pack might get re-used, but there are also various cases where we might pick a sub-optimal delta from a newer pack instead.
Furthermore, supplying --aggressive
will tweak the --depth
and
--window
options passed to git-repack(1). See the
gc.aggressiveDepth
and gc.aggressiveWindow
settings below. By
using a larger window size we’re more likely to find more optimal
deltas.
It’s probably not worth it to use this option on a given repository without running tailored performance benchmarks on it. It takes a lot more time, and the resulting space/delta optimization may or may not be worth it. Not using this at all is the right trade-off for most users and their repositories.
CONFIGURATION
Everything below this line in this section is selectively included from the git-config(1) documentation. The content is the same as what’s found there:
- gc.aggressiveDepth
-
The depth parameter used in the delta compression algorithm used by git gc --aggressive. This defaults to 50, which is the default for the
--depth
option when--aggressive
isn’t in use.See the documentation for the
--depth
option in git-repack(1) for more details. - gc.aggressiveWindow
-
The window size parameter used in the delta compression algorithm used by git gc --aggressive. This defaults to 250, which is a much more aggressive window size than the default
--window
of 10.See the documentation for the
--window
option in git-repack(1) for more details. - gc.auto
-
When there are approximately more than this many loose objects in the repository,
git
gc
--auto
will pack them. Some Porcelain commands use this command to perform a light-weight garbage collection from time to time. The default value is 6700.Setting this to 0 disables not only automatic packing based on the number of loose objects, but also any other heuristic
git
gc
--auto
will otherwise use to determine if there’s work to do, such asgc.autoPackLimit
. - gc.autoPackLimit
-
When there are more than this many packs that are not marked with *.
keep
file in the repository,git
gc
--auto
consolidates them into one larger pack. The default value is 50. Setting this to 0 disables it. Settinggc.auto
to 0 will also disable this.See the
gc.bigPackThreshold
configuration variable below. When in use, it’ll affect how the auto pack limit works. - gc.autoDetach
-
Make
git
gc
--auto
return immediately and run in the background if the system supports it. Default is true. This config variable acts as a fallback in casemaintenance.autoDetach
is not set. - gc.bigPackThreshold
-
If non-zero, all non-cruft packs larger than this limit are kept when
git
gc
is run. This is very similar to--keep-largest-pack
except that all non-cruft packs that meet the threshold are kept, not just the largest pack. Defaults to zero. Common unit suffixes of k, m, or g are supported.Note that if the number of kept packs is more than gc.autoPackLimit, this configuration variable is ignored, all packs except the base pack will be repacked. After this the number of packs should go below gc.autoPackLimit and gc.bigPackThreshold should be respected again.
If the amount of memory estimated for
git
repack
to run smoothly is not available andgc.bigPackThreshold
is not set, the largest pack will also be excluded (this is the equivalent of runninggit
gc
with--keep-largest-pack
). - gc.writeCommitGraph
-
If true, then gc will rewrite the commit-graph file when git-gc(1) is run. When using
git
gc
--auto
the commit-graph will be updated if housekeeping is required. Default is true. See git-commit-graph(1) for details. - gc.logExpiry
-
If the file gc.log exists, then
git
gc
--auto
will print its content and exit with status zero instead of running unless that file is more than gc.logExpiry old. Default is "1.day". Seegc.pruneExpire
for more ways to specify its value. - gc.packRefs
-
Running
git
pack-refs
in a repository renders it unclonable by Git versions prior to 1.5.1.2 over dumb transports such as HTTP. This variable determines whether git gc runsgit
pack-refs
. This can be set tonotbare
to enable it within all non-bare repos or it can be set to a boolean value. The default istrue
. - gc.cruftPacks
-
Store unreachable objects in a cruft pack (see git-repack(1)) instead of as loose objects. The default is
true
. - gc.maxCruftSize
-
Limit the size of new cruft packs when repacking. When specified in addition to
--max-cruft-size
, the command line option takes priority. See the--max-cruft-size
option of git-repack(1). - gc.pruneExpire
-
When git gc is run, it will call prune --expire 2.weeks.ago (and repack --cruft --cruft-expiration 2.weeks.ago if using cruft packs via
gc.cruftPacks
or--cruft
). Override the grace period with this config variable. The value "now" may be used to disable this grace period and always prune unreachable objects immediately, or "never" may be used to suppress pruning. This feature helps prevent corruption when git gc runs concurrently with another process writing to the repository; see the "NOTES" section of git-gc(1). - gc.worktreePruneExpire
-
When git gc is run, it calls git worktree prune --expire 3.months.ago. This config variable can be used to set a different grace period. The value "now" may be used to disable the grace period and prune
$GIT_DIR/worktrees
immediately, or "never" may be used to suppress pruning. - gc.reflogExpire
- gc.<pattern>.reflogExpire
-
git reflog expire removes reflog entries older than this time; defaults to 90 days. The value "now" expires all entries immediately, and "never" suppresses expiration altogether. With "<pattern>" (e.g. "refs/stash") in the middle the setting applies only to the refs that match the <pattern>.
- gc.reflogExpireUnreachable
- gc.<pattern>.reflogExpireUnreachable
-
git reflog expire removes reflog entries older than this time and are not reachable from the current tip; defaults to 30 days. The value "now" expires all entries immediately, and "never" suppresses expiration altogether. With "<pattern>" (e.g. "refs/stash") in the middle, the setting applies only to the refs that match the <pattern>.
These types of entries are generally created as a result of using
git
commit
--amend
orgit
rebase
and are the commits prior to the amend or rebase occurring. Since these changes are not part of the current project most users will want to expire them sooner, which is why the default is more aggressive thangc.reflogExpire
. - gc.recentObjectsHook
-
When considering whether or not to remove an object (either when generating a cruft pack or storing unreachable objects as loose), use the shell to execute the specified command(s). Interpret their output as object IDs which Git will consider as "recent", regardless of their age. By treating their mtimes as "now", any objects (and their descendants) mentioned in the output will be kept regardless of their true age.
Output must contain exactly one hex object ID per line, and nothing else. Objects which cannot be found in the repository are ignored. Multiple hooks are supported, but all must exit successfully, else the operation (either generating a cruft pack or unpacking unreachable objects) will be halted.
- gc.repackFilter
-
When repacking, use the specified filter to move certain objects into a separate packfile. See the
--filter=
<filter-spec> option of git-repack(1). - gc.repackFilterTo
-
When repacking and using a filter, see
gc.repackFilter
, the specified location will be used to create the packfile containing the filtered out objects. WARNING: The specified location should be accessible, using for example the Git alternates mechanism, otherwise the repo could be considered corrupt by Git as it might not be able to access the objects in that packfile. See the--filter-to=
<dir> option of git-repack(1) and theobjects/info/alternates
section of gitrepository-layout(5). - gc.rerereResolved
-
Records of conflicted merge you resolved earlier are kept for this many days when git rerere gc is run. You can also use more human-readable "1.month.ago", etc. The default is 60 days. See git-rerere(1).
- gc.rerereUnresolved
-
Records of conflicted merge you have not resolved are kept for this many days when git rerere gc is run. You can also use more human-readable "1.month.ago", etc. The default is 15 days. See git-rerere(1).
NOTES
git gc tries very hard not to delete objects that are referenced anywhere in your repository. In particular, it will keep not only objects referenced by your current set of branches and tags, but also objects referenced by the index, remote-tracking branches, reflogs (which may reference commits in branches that were later amended or rewound), and anything else in the refs/* namespace. Note that a note (of the kind created by git notes) attached to an object does not contribute in keeping the object alive. If you are expecting some objects to be deleted and they aren’t, check all of those locations and decide whether it makes sense in your case to remove those references.
On the other hand, when git gc runs concurrently with another process, there is a risk of it deleting an object that the other process is using but hasn’t created a reference to. This may just cause the other process to fail or may corrupt the repository if the other process later adds a reference to the deleted object. Git has two features that significantly mitigate this problem:
-
Any object with modification time newer than the
--prune
date is kept, along with everything reachable from it. -
Most operations that add an object to the database update the modification time of the object if it is already present so that #1 applies.
However, these features fall short of a complete solution, so users who run commands concurrently have to live with some risk of corruption (which seems to be low in practice).
HOOKS
The git gc --auto command will run the pre-auto-gc hook. See githooks(5) for more information.
GIT
Part of the git(1) suite